Cases

事例

CPU Coolers

CPUクーラー

Power Supplies

電源装置

Case Fans

ケースファン

Model Numbers

型番

Specifications

仕様

Manuals

マニュアル

Warranty

保証

Missing Parts

欠落部品

Technical Support

テクニカルサポート

Products

製品

Downloads

ダウンロード

System Requirements

システム要件

Installation

インストール

Displays

ディスプレイ

Software

ソフトウェア

Service Points

サービス拠点

Languages

言語

Contact

接触

Privacy Policy

プライバシーポリシー

Website

Webサイト

Become a Partner

パートナーになる

Partner Support

パートナーサポート

Collaborations

コラボレーション

Partnerships

パートナーシップ

How do I know whether a darkFlash CPU cooler supports my CPU socket?

 and check the supported CPU sockets in the product specifications.

Compare the listed socket names, such as Intel LGA1851 or LGA1700 and AMD AM5 or AM4, with the socket used by your motherboard and CPU. Check the complete cooler model and version, as products in the same series may include different mounting hardware.

Also confirm that the required bracket, backplate, and mounting parts are included with your product.

How do I know whether a darkFlash CPU cooler supports my CPU socket?

Find your exact cooler model on the darkFlash website and check the supported CPU sockets in the product specifications.

Compare the listed socket names, such as Intel LGA1851 or LGA1700 and AMD AM5 or AM4, with the socket used by your motherboard and CPU. Check the complete cooler model and version, as products in the same series may include different mounting hardware.

Also confirm that the required bracket, backplate, and mounting parts are included with your product.

darkFlash製CPUクーラーが私のCPUソケットに対応しているかどうかは、どうすればわかりますか？

Where should I connect the pump and fans on my all-in-one (AIO) liquid cooler?

Turn off the PC, switch off the PSU, and unplug the power cord before connecting the cooler.

Scan the QR code on the product packaging to access the darkFlash manual page. Search for the complete cooler model and follow the connection diagram for that model. Also refer to the motherboard manual for the location and specifications of each header.

Never connect a 3-pin 5V ARGB cable to a 4-pin 12V RGB header.

After starting the PC, confirm in the BIOS or monitoring software that the pump and fans are detected and operating. If the pump speed is not detected or the CPU temperature rises rapidly, turn off the PC immediately and recheck the connections.

Where should I connect the pump and fans on my all-in-one (AIO) liquid cooler?

Turn off the PC, switch off the PSU, and unplug the power cord before connecting the cooler.

Scan the QR code on the product packaging to access the darkFlash manual page. Search for the complete cooler model and follow the connection diagram for that model. Also refer to the motherboard manual for the location and specifications of each header.

Depending on the cooler model:





Connect the pump cable to the header specified in the cooler manual, such as AIO_PUMP, PUMP, or CPU_FAN.



Connect the radiator fans to CPU_FAN, CPU_OPT, or the included fan hub or controller, as instructed.



Connect ARGB lighting only to a compatible 3-pin 5V ARGB header or the included controller.



Connect any required internal USB or SATA power cables shown in the manual.

Never connect a 3-pin 5V ARGB cable to a 4-pin 12V RGB header.

After starting the PC, confirm in the BIOS or monitoring software that the pump and fans are detected and operating. If the pump speed is not detected or the CPU temperature rises rapidly, turn off the PC immediately and recheck the connections.

Where should I connect the pump and fans on my liquid cooler?

水冷クーラーのポンプとファンはどこに接続すれば良いですか？

Where should I install my AIO radiator for the best cooling performance?

For most systems, mounting the radiator at the top of the case as exhaust provides a good balance between CPU cooling and overall case airflow. A front-mounted radiator can also provide strong CPU cooling, although it may direct warmer air toward the graphics card and other components.

Whichever position you choose, make sure that at least part of the radiator is positioned higher than the pump. This helps keep air away from the pump and reduces the risk of noise or reduced cooling performance. When installing the radiator at the front of the case, position the tubes at the bottom whenever the case layout allows.

The best mounting position also depends on the case design, radiator size, component clearance, and airflow direction. Check the specifications of both the case and the cooler before installation.

For model-specific instructions, scan the QR code on the product packaging and search for your exact model to access its manual.

The Best Position for Installing an AIO Liquid Cooler Radiator

Where should I install my AIO radiator for the best cooling performance?

For most systems, mounting the radiator at the top of the case as exhaust provides a good balance between CPU cooling and overall case airflow. A front-mounted radiator can also provide strong CPU cooling, although it may direct warmer air toward the graphics card and other components.

Whichever position you choose, make sure that at least part of the radiator is positioned higher than the pump. This helps keep air away from the pump and reduces the risk of noise or reduced cooling performance. When installing the radiator at the front of the case, position the tubes at the bottom whenever the case layout allows.

The best mounting position also depends on the case design, radiator size, component clearance, and airflow direction. Check the specifications of both the case and the cooler before installation.

For model-specific instructions, scan the QR code on the product packaging and search for your exact model to access its manual.

The Best Position for Installing an AIO Liquid Cooler Radiator

最高の冷却性能を得るには、AIOラジエーターをどこに設置すればよいですか？

What should I do if my AIO cooler makes a bubbling or gurgling sound?

A brief bubbling or gurgling sound can be normal after installation or when the system is first turned on. It is usually caused by small air bubbles moving through the cooler and should decrease after the pump has been running for a while.

If the sound continues, confirm that at least part of the radiator is positioned higher than the pump. For a front-mounted radiator, position the tubes at the bottom whenever possible.

You can also shut down the computer, place the case on a stable surface, and gently tilt it a few degrees in different directions. Return the case to its normal position before turning the computer back on. Do not shake or turn the case upside down.

What should I do if my AIO cooler makes a bubbling or gurgling sound?

A brief bubbling or gurgling sound can be normal after installation or when the system is first turned on. It is usually caused by small air bubbles moving through the cooler and should decrease after the pump has been running for a while.

If the sound continues, confirm that at least part of the radiator is positioned higher than the pump. For a front-mounted radiator, position the tubes at the bottom whenever possible.

You can also shut down the computer, place the case on a stable surface, and gently tilt it a few degrees in different directions. Return the case to its normal position before turning the computer back on. Do not shake or turn the case upside down.

一体型水冷クーラーからブクブク、ゴボゴボといった音がする場合はどうすればいいですか？

ゲームとPC自作への共通の情熱から生まれたdarkFlashは、個性的なデザイン、信頼性の高いパフォーマンス、そして革新的な発想を融合させた製品づくりに尽力しています。

PCケース、冷却ソリューション、ケースファン、ゲーミング家具、アクセサリーなどを自ら組み立て、テストし、使用することで、ユーザーが本当に必要としているものを深く理解しています。すべての製品は明確な目的を持って開発され、経験を通して磨き上げられ、人々の組み立て、プレイ、そして創造のあり方を向上させるために設計されています。

私たちの目標はシンプルです。最高のパフォーマンスを発揮する製品を通して、すべてのユーザーに力を与え、限界のない創造への意欲を掻き立てることです。

darkFlash

Born from a shared passion for gaming and PC building, darkFlash is dedicated to creating products that combine distinctive design, reliable performance, and thoughtful innovation.

By personally building, testing, and using our PC cases, cooling solutions, case fans, gaming furniture, and accessories, we gain a deeper understanding of what users truly need. Every product is developed with purpose, refined through experience, and engineered to elevate the way people build, play, and create.

Our goal is simple: to empower every user with products that perform at their best and inspire them to build without limits.