Cases

사례

CPU Coolers

CPU 쿨러

Power Supplies

전원 공급 장치

Case Fans

케이스 팬

Model Numbers

모델 번호

Specifications

명세서

Manuals

매뉴얼

Warranty

보증

Missing Parts

누락된 부품

Technical Support

기술 지원

Products

제품

Downloads

다운로드

System Requirements

시스템 요구사항

Installation

설치

Displays

디스플레이

Software

소프트웨어

Service Points

서비스 지점

Languages

언어

Contact

연락하다

Privacy Policy

개인정보 보호정책

Website

웹사이트

Become a Partner

파트너가 되세요

Partner Support

파트너 지원

Collaborations

협업

Partnerships

파트너십

How do I choose the right power supply for my PC?

Consider the following when selecting a power supply:

For more detailed information, please read 

How to Choose the Right Power Supply for Your PC

Product availability, included power cables, and warranty terms may vary by region. Before purchasing, confirm the product’s compatibility and regional specifications with the retailer or distributor from which you plan to purchase it.

How do I choose the right power supply for my PC?

Consider the following when selecting a power supply:





Form factor and dimensions: Confirm whether your case supports an ATX, SFX, or SFX-L power supply. Also check the available installation depth, especially in compact cases.



Wattage: Estimate the total power requirements of your CPU, graphics card, storage devices, fans, and other components. Follow the graphics card manufacturer’s recommended PSU capacity and allow reasonable headroom for peak loads and future upgrades.



Connectors: Make sure the power supply includes the required 24-pin motherboard, CPU EPS, graphics card, SATA, and peripheral connectors. Some modern graphics cards require a native 12V-2x6 or another specific power connector.



Standards: For newer high-performance components, consider a power supply that supports a recent ATX specification and the required PCIe power standard.



Efficiency: Certifications such as 80 PLUS and Cybenetics can help you compare power efficiency, heat output, and noise performance.



Protection and quality: Look for appropriate electrical protection features, reliable construction, and warranty support in your region.



Cable design: Modular or semi-modular cables can make installation and cable management easier, especially in compact cases.



For more detailed information, please read How to Choose the Right Power Supply for Your PC.



Product availability, included power cables, and warranty terms may vary by region. Before purchasing, confirm the product’s compatibility and regional specifications with the retailer or distributor from which you plan to purchase it.

내 PC에 맞는 파워 서플라이는 어떻게 선택해야 할까요?

How do I choose the right PSU wattage for my PC build?

Start with the recommended PSU wattage provided by your graphics card manufacturer, then account for the CPU and the rest of your system.

Choose a PSU with enough capacity for the system’s expected peak power draw, plus reasonable headroom for temporary power spikes, future upgrades, or overclocking.

Also confirm that the PSU provides all required power connectors for your motherboard, CPU, graphics card, and storage devices. Wattage alone does not guarantee compatibility.

How do I choose the right PSU wattage for my PC build?

Start with the recommended PSU wattage provided by your graphics card manufacturer, then account for the CPU and the rest of your system.

Choose a PSU with enough capacity for the system’s expected peak power draw, plus reasonable headroom for temporary power spikes, future upgrades, or overclocking.

Also confirm that the PSU provides all required power connectors for your motherboard, CPU, graphics card, and storage devices. Wattage alone does not guarantee compatibility.

PC 조립에 적합한 파워서플라이(PSU) 와트수를 어떻게 선택해야 할까요?

Can I use modular PSU cables from another brand or model?

 modular PSU cables from another brand or model unless darkFlash has explicitly confirmed that the cable is compatible with your exact PSU model.

Modular connectors may look identical but use different pin assignments on the PSU side. Using an incompatible cable can damage the power supply, motherboard, graphics card, storage devices, or other components.

Use only the cables included with your PSU or replacement cables approved for that exact model. Before connecting or replacing any PSU cable, turn off the PC, switch off the PSU, and unplug the power cord.

 and provide the complete PSU model number.

Can I use modular PSU cables from another brand or model?

No. Do not use modular PSU cables from another brand or model unless darkFlash has explicitly confirmed that the cable is compatible with your exact PSU model.

Modular connectors may look identical but use different pin assignments on the PSU side. Using an incompatible cable can damage the power supply, motherboard, graphics card, storage devices, or other components.

Use only the cables included with your PSU or replacement cables approved for that exact model. Before connecting or replacing any PSU cable, turn off the PC, switch off the PSU, and unplug the power cord.

If you need a replacement cable, contact darkFlash Support and provide the complete PSU model number.

다른 브랜드나 모델의 모듈형 파워서플라이 케이블을 사용할 수 있나요?

, also known as semi-passive fan mode. When this mode is active, the fan remains off during startup or under light system loads. It starts spinning only when the power supply reaches a specific temperature or load level. This is normal and helps reduce noise and fan wear.

Check the specifications for your exact power supply model to confirm whether it supports Zero RPM mode. If the power supply has a fan mode switch, make sure it is set according to the product instructions.

Do not insert anything into the fan grille or open the power supply. Dangerous voltage may remain inside the unit even after it has been disconnected.

For a more detailed explanation, please read 

Why Is My PSU Fan Not Spinning? Understanding Zero RPM Mode

If your power supply does not support Zero RPM mode, or if the fan does not start when the system is under load and the unit becomes unusually hot, produces an unusual smell or sound, or causes the computer to shut down, turn off the computer and unplug it immediately.

Contact the retailer or distributor from which you purchased the product for inspection, replacement, or warranty service.

Why is my power supply fan not spinning?

Some power supplies feature Zero RPM mode, also known as semi-passive fan mode. When this mode is active, the fan remains off during startup or under light system loads. It starts spinning only when the power supply reaches a specific temperature or load level. This is normal and helps reduce noise and fan wear.

Check the specifications for your exact power supply model to confirm whether it supports Zero RPM mode. If the power supply has a fan mode switch, make sure it is set according to the product instructions.

Do not insert anything into the fan grille or open the power supply. Dangerous voltage may remain inside the unit even after it has been disconnected.



For a more detailed explanation, please read Why Is My PSU Fan Not Spinning? Understanding Zero RPM Mode.



If your power supply does not support Zero RPM mode, or if the fan does not start when the system is under load and the unit becomes unusually hot, produces an unusual smell or sound, or causes the computer to shut down, turn off the computer and unplug it immediately.

Contact the retailer or distributor from which you purchased the product for inspection, replacement, or warranty service.

Why is my power supply fan not spinning?

내 파워서플라이 팬이 회전하지 않는 이유는 무엇인가요?

How can I test my power supply if my PC will not boot?

Before testing the power supply, check the following:

A power supply fan may remain off when Zero RPM mode is active, so a stationary fan does not always indicate that the power supply has failed.

For detailed testing instructions, please read 

How to Test a Power Supply (PSU) If Your PC Won’t Boot

Follow the instructions carefully. Before setting up the test described in the article, switch off the power supply, unplug it from the wall, and disconnect it from all computer components. Reconnect power only when instructed. If you are unfamiliar with power supply testing, ask a qualified technician for assistance.

Never open the power supply enclosure or touch its internal components. Dangerous voltage may remain inside even after the unit has been disconnected.

A basic power-on test can show whether the power supply starts, but it cannot confirm that every voltage output remains stable under load.

If the power supply does not start, the computer continues to shut down unexpectedly, or you notice excessive heat, an unusual smell, or unusual sounds, stop using it. Contact the retailer or distributor from which you purchased the product for inspection, replacement, or warranty service.

How can I test my power supply if my PC will not boot?

Before testing the power supply, check the following:





Confirm that the wall outlet or power strip is working.



Make sure the power cable is connected securely.



Check that the switch on the back of the power supply is set to the ON position.



Confirm that the 24-pin motherboard cable and CPU power cable are connected correctly.



Check the graphics card power cables, if required.



Make sure the case power-button connector is connected to the correct motherboard header.

A power supply fan may remain off when Zero RPM mode is active, so a stationary fan does not always indicate that the power supply has failed.



For detailed testing instructions, please read How to Test a Power Supply (PSU) If Your PC Won’t Boot.



Follow the instructions carefully. Before setting up the test described in the article, switch off the power supply, unplug it from the wall, and disconnect it from all computer components. Reconnect power only when instructed. If you are unfamiliar with power supply testing, ask a qualified technician for assistance.

Never open the power supply enclosure or touch its internal components. Dangerous voltage may remain inside even after the unit has been disconnected.

A basic power-on test can show whether the power supply starts, but it cannot confirm that every voltage output remains stable under load.

If the power supply does not start, the computer continues to shut down unexpectedly, or you notice excessive heat, an unusual smell, or unusual sounds, stop using it. Contact the retailer or distributor from which you purchased the product for inspection, replacement, or warranty service.

PC가 부팅되지 않을 경우 전원 공급 장치를 어떻게 테스트할 수 있나요?

다크플래시는 게이밍과 PC 조립에 대한 공통된 열정에서 탄생했으며, 독창적인 디자인, 안정적인 성능, 그리고 혁신적인 아이디어를 결합한 제품을 만드는 데 전념하고 있습니다.

저희는 PC 케이스, 쿨링 솔루션, 케이스 팬, 게이밍 가구 및 액세서리를 직접 조립하고 테스트하며 사용함으로써 사용자의 진정한 니즈를 깊이 이해합니다. 모든 제품은 명확한 목적을 가지고 개발되고, 경험을 통해 다듬어지며, 사용자의 PC 조립, 게임 플레이, 그리고 창작 활동을 한 단계 끌어올리도록 설계되었습니다.

저희의 목표는 간단합니다. 최고의 성능을 발휘하는 제품을 통해 모든 사용자가 한계 없이 자신만의 PC를 구축할 수 있도록 영감을 주는 것입니다.

darkFlash

Born from a shared passion for gaming and PC building, darkFlash is dedicated to creating products that combine distinctive design, reliable performance, and thoughtful innovation.

By personally building, testing, and using our PC cases, cooling solutions, case fans, gaming furniture, and accessories, we gain a deeper understanding of what users truly need. Every product is developed with purpose, refined through experience, and engineered to elevate the way people build, play, and create.

Our goal is simple: to empower every user with products that perform at their best and inspire them to build without limits.