Cases

Mga Kaso

CPU Coolers

Mga CPU Cooler

Power Supplies

Mga Suplay ng Kuryente

Case Fans

Mga Tagahanga ng Kaso

Model Numbers

Mga Numero ng Modelo

Specifications

Mga detalye

Manuals

Mga Manwal

Warranty

Garantiya

Missing Parts

Mga Nawawalang Bahagi

Technical Support

Suportang Teknikal

Products

Mga Produkto

Downloads

Mga Download

System Requirements

Mga Kinakailangan sa Sistema

Installation

Pag-install

Displays

Mga Display

Software

Service Points

Mga Puntos ng Serbisyo

Languages

Mga Wika

Contact

Makipag-ugnayan

Privacy Policy

Patakaran sa Pagkapribado

Website

Become a Partner

Maging Kasosyo

Partner Support

Suporta sa Kasosyo

Collaborations

Mga Kolaborasyon

Partnerships

Mga Pakikipagsosyo

How do I know whether a darkFlash CPU cooler supports my CPU socket?

 and check the supported CPU sockets in the product specifications.

Compare the listed socket names, such as Intel LGA1851 or LGA1700 and AMD AM5 or AM4, with the socket used by your motherboard and CPU. Check the complete cooler model and version, as products in the same series may include different mounting hardware.

Also confirm that the required bracket, backplate, and mounting parts are included with your product.

How do I know whether a darkFlash CPU cooler supports my CPU socket?

Find your exact cooler model on the darkFlash website and check the supported CPU sockets in the product specifications.

Compare the listed socket names, such as Intel LGA1851 or LGA1700 and AMD AM5 or AM4, with the socket used by your motherboard and CPU. Check the complete cooler model and version, as products in the same series may include different mounting hardware.

Also confirm that the required bracket, backplate, and mounting parts are included with your product.

Paano ko malalaman kung sinusuportahan ng darkFlash CPU cooler ang aking CPU socket?

Where should I connect the pump and fans on my all-in-one (AIO) liquid cooler?

Turn off the PC, switch off the PSU, and unplug the power cord before connecting the cooler.

Scan the QR code on the product packaging to access the darkFlash manual page. Search for the complete cooler model and follow the connection diagram for that model. Also refer to the motherboard manual for the location and specifications of each header.

Never connect a 3-pin 5V ARGB cable to a 4-pin 12V RGB header.

After starting the PC, confirm in the BIOS or monitoring software that the pump and fans are detected and operating. If the pump speed is not detected or the CPU temperature rises rapidly, turn off the PC immediately and recheck the connections.

Where should I connect the pump and fans on my all-in-one (AIO) liquid cooler?

Turn off the PC, switch off the PSU, and unplug the power cord before connecting the cooler.

Scan the QR code on the product packaging to access the darkFlash manual page. Search for the complete cooler model and follow the connection diagram for that model. Also refer to the motherboard manual for the location and specifications of each header.

Depending on the cooler model:





Connect the pump cable to the header specified in the cooler manual, such as AIO_PUMP, PUMP, or CPU_FAN.



Connect the radiator fans to CPU_FAN, CPU_OPT, or the included fan hub or controller, as instructed.



Connect ARGB lighting only to a compatible 3-pin 5V ARGB header or the included controller.



Connect any required internal USB or SATA power cables shown in the manual.

Never connect a 3-pin 5V ARGB cable to a 4-pin 12V RGB header.

After starting the PC, confirm in the BIOS or monitoring software that the pump and fans are detected and operating. If the pump speed is not detected or the CPU temperature rises rapidly, turn off the PC immediately and recheck the connections.

Where should I connect the pump and fans on my liquid cooler?

Saan ko dapat ikonekta ang bomba at mga bentilador sa aking liquid cooler?

Where should I install my AIO radiator for the best cooling performance?

For most systems, mounting the radiator at the top of the case as exhaust provides a good balance between CPU cooling and overall case airflow. A front-mounted radiator can also provide strong CPU cooling, although it may direct warmer air toward the graphics card and other components.

Whichever position you choose, make sure that at least part of the radiator is positioned higher than the pump. This helps keep air away from the pump and reduces the risk of noise or reduced cooling performance. When installing the radiator at the front of the case, position the tubes at the bottom whenever the case layout allows.

The best mounting position also depends on the case design, radiator size, component clearance, and airflow direction. Check the specifications of both the case and the cooler before installation.

For model-specific instructions, scan the QR code on the product packaging and search for your exact model to access its manual.

The Best Position for Installing an AIO Liquid Cooler Radiator

Where should I install my AIO radiator for the best cooling performance?

For most systems, mounting the radiator at the top of the case as exhaust provides a good balance between CPU cooling and overall case airflow. A front-mounted radiator can also provide strong CPU cooling, although it may direct warmer air toward the graphics card and other components.

Whichever position you choose, make sure that at least part of the radiator is positioned higher than the pump. This helps keep air away from the pump and reduces the risk of noise or reduced cooling performance. When installing the radiator at the front of the case, position the tubes at the bottom whenever the case layout allows.

The best mounting position also depends on the case design, radiator size, component clearance, and airflow direction. Check the specifications of both the case and the cooler before installation.

For model-specific instructions, scan the QR code on the product packaging and search for your exact model to access its manual.

The Best Position for Installing an AIO Liquid Cooler Radiator

Saan ko dapat i-install ang aking AIO radiator para sa pinakamahusay na performance ng paglamig?

What should I do if my AIO cooler makes a bubbling or gurgling sound?

A brief bubbling or gurgling sound can be normal after installation or when the system is first turned on. It is usually caused by small air bubbles moving through the cooler and should decrease after the pump has been running for a while.

If the sound continues, confirm that at least part of the radiator is positioned higher than the pump. For a front-mounted radiator, position the tubes at the bottom whenever possible.

You can also shut down the computer, place the case on a stable surface, and gently tilt it a few degrees in different directions. Return the case to its normal position before turning the computer back on. Do not shake or turn the case upside down.

What should I do if my AIO cooler makes a bubbling or gurgling sound?

A brief bubbling or gurgling sound can be normal after installation or when the system is first turned on. It is usually caused by small air bubbles moving through the cooler and should decrease after the pump has been running for a while.

If the sound continues, confirm that at least part of the radiator is positioned higher than the pump. For a front-mounted radiator, position the tubes at the bottom whenever possible.

You can also shut down the computer, place the case on a stable surface, and gently tilt it a few degrees in different directions. Return the case to its normal position before turning the computer back on. Do not shake or turn the case upside down.

Ano ang dapat kong gawin kung ang aking AIO cooler ay lumilikha ng tunog ng pagkulo o pag-aalburuto?

Isinilang mula sa isang ibinahaging hilig sa paglalaro at pagbuo ng PC, ang darkFlash ay nakatuon sa paglikha ng mga produktong pinagsasama ang natatanging disenyo, maaasahang pagganap, at maalalahaning inobasyon.

Sa pamamagitan ng personal na pagbuo, pagsubok, at paggamit ng aming mga PC case, mga solusyon sa pagpapalamig, mga case fan, mga muwebles sa paglalaro, at mga aksesorya, nagkakaroon kami ng mas malalim na pag-unawa sa kung ano talaga ang kailangan ng mga gumagamit. Ang bawat produkto ay binuo nang may layunin, pino sa pamamagitan ng karanasan, at ininhinyero upang mapahusay ang paraan ng pagbuo, paglalaro, at paglikha ng mga tao.

Ang aming layunin ay simple: bigyang kapangyarihan ang bawat gumagamit gamit ang mga produktong gumaganap sa kanilang pinakamahusay na antas at magbigay-inspirasyon sa kanila na bumuo nang walang limitasyon.

darkFlash

Born from a shared passion for gaming and PC building, darkFlash is dedicated to creating products that combine distinctive design, reliable performance, and thoughtful innovation.

By personally building, testing, and using our PC cases, cooling solutions, case fans, gaming furniture, and accessories, we gain a deeper understanding of what users truly need. Every product is developed with purpose, refined through experience, and engineered to elevate the way people build, play, and create.

Our goal is simple: to empower every user with products that perform at their best and inspire them to build without limits.