Hardware Tips                                                   

Most motherboards on the market come with four RAM slots, but that doesn't mean filling all four is the best option. The optimal number of RAM sticks depends on the balance between stability and performance you're aiming for.

Recommended Setup: Two Sticks in Dual-Channel

If your motherboard has four slots, the best configuration is usually 

While filling all four slots might look visually pleasing, it doesn’t necessarily mean better performance—and may even cause problems:

Key Things to Keep in Mind When Installing RAM:

To maximize performance, install the RAM in the 

Mixing RAM sticks with different brands or frequencies can lead to compatibility issues or prevent your system from booting properly.





Most motherboards on the market come with four RAM slots, but that doesn't mean filling all four is the best option. The optimal number of RAM sticks depends on the balance between stability and performance you're aiming for.



Recommended Setup: Two Sticks in Dual-Channel

If your motherboard has four slots, the best configuration is usually two RAM sticks. Here’s why:





Maximum RAM performance: Two sticks allow for dual-channel memory, significantly boosting speed compared to a single stick.



Faster boot times: With only two sticks, the system performs fewer checks during startup.



Dual-channel advantages: The CPU can access two RAM modules simultaneously, increasing data transfer speed dramatically.



Room for future upgrades: You still have two empty slots for easy expansion down the line.







What Happens If You Use Four Sticks?

While filling all four slots might look visually pleasing, it doesn’t necessarily mean better performance—and may even cause problems:





Slower boot times: The system takes longer to check all four modules during startup.



Compatibility issues: All four sticks must have identical specs (capacity, speed, etc.) or performance could suffer.



Reduced stability: Due to motherboard wiring design, having four sticks can cause latency issues that affect performance and stability.







Key Things to Keep in Mind When Installing RAM:

1. Correct Slot Placement

To maximize performance, install the RAM in the 2nd and 4th slots from the left (usually labeled DIMM A2 and B2).







2. Avoid Mixing Brands or Speeds

Mixing RAM sticks with different brands or frequencies can lead to compatibility issues or prevent your system from booting properly.





Here's what you need to know about how many RAM sticks to install for optimal performance — and key tips to watch out for.

RAM Demystified: How Many Sticks Are Best for Your PC?

Tips Perangkat Keras

Berikut yang perlu Anda ketahui tentang berapa banyak modul RAM yang perlu dipasang untuk performa optimal — dan kiat-kiat penting yang perlu diperhatikan.

RAM Terungkap: Berapa Banyak Modul RAM yang Terbaik untuk PC Anda?

Tech News                                                       

If you’ve been tracking component prices lately, you’ve likely felt the sting: the 32GB DDR5 kit that fit your budget last month has nearly doubled in price. According to 2026 market forecasts, a global shortage of DRAM and NAND Flash chips has pushed pre-built and DIY PC costs up by 8% to 12%.

In this era of "Hardware Inflation," should you bite the bullet and overpay, or is there a smarter way to upgrade? Here is how to navigate the 2026 memory crisis without compromising on your build quality.

This price surge isn't a fluke; it's driven by two massive industry shifts:

When RAM and SSD prices skyrocket, they eat into your total budget, often forcing gamers to settle for a lower-tier GPU—a compromise that directly hurts your gaming experience.

PC Component Price Trends: What Should You Buy Now?

While memory prices are volatile, other critical PC components remain relatively stable. The secret to "Smart Building" in 2026 is prioritizing parts with the longest lifespan and highest price stability.

Instead of overpaying for a mid-range RAM kit, savvy builders are investing in the 

: The Case, The PSU, and The Cooling. These parts don't go obsolete every two years and are currently shielded from the memory price hike.

Future-Proofing Your Build: Focus on Chassis and Power

If your current PC is struggling but you aren't ready to pay the "Memory Tax," the smartest move is to refresh your foundation.

A premium case and power supply can last 5 to 10 years, serving you through multiple CPU and GPU upgrades.

Peripherals: The Highest Return on Investment (ROI)

In 2026, you don't need a new GPU to make your PC feel "new." Sometimes, the most noticeable performance boost comes from what you touch every day.

Conclusion: Don't Let High Prices Compromise Your PC’s Potential

Don't settle for a cheap, suffocating case or a barely-sufficient power supply just to afford overpriced RAM. Invest in high-quality 

 components today to build a rock-solid foundation. By focusing on your case, power, and peripherals, you can enjoy a premium experience now and be ready to drop in that high-speed memory whenever the market stabilizes.





If you’ve been tracking component prices lately, you’ve likely felt the sting: the 32GB DDR5 kit that fit your budget last month has nearly doubled in price. According to 2026 market forecasts, a global shortage of DRAM and NAND Flash chips has pushed pre-built and DIY PC costs up by 8% to 12%.

In this era of "Hardware Inflation," should you bite the bullet and overpay, or is there a smarter way to upgrade? Here is how to navigate the 2026 memory crisis without compromising on your build quality.



Why is PC Hardware So Expensive in 2026?

This price surge isn't a fluke; it's driven by two massive industry shifts:





The AI Infrastructure Demand: Global data centers are hoarding HBM (High Bandwidth Memory), squeezing the production lines of standard DDR5 RAM used by gamers.



The CUDIMM Transition: As manufacturers pivot to the new CUDIMM standard, supply for traditional DDR5 is shrinking, leading to a massive supply-demand imbalance.







When RAM and SSD prices skyrocket, they eat into your total budget, often forcing gamers to settle for a lower-tier GPU—a compromise that directly hurts your gaming experience.



PC Component Price Trends: What Should You Buy Now?

While memory prices are volatile, other critical PC components remain relatively stable. The secret to "Smart Building" in 2026 is prioritizing parts with the longest lifespan and highest price stability.

Instead of overpaying for a mid-range RAM kit, savvy builders are investing in the "Foundational Trio": The Case, The PSU, and The Cooling. These parts don't go obsolete every two years and are currently shielded from the memory price hike.





(darkFlash DY460 ATX PC Case)



Future-Proofing Your Build: Focus on Chassis and Power

If your current PC is struggling but you aren't ready to pay the "Memory Tax," the smartest move is to refresh your foundation.



Invest in a High-End PSU and Case

A premium case and power supply can last 5 to 10 years, serving you through multiple CPU and GPU upgrades.





The Power Foundation: With RTX 50-series power demands peaking, a high-quality ATX 3.1 PSU is non-negotiable. The darkFlash PMT Series / PMT Series White Edition offers the stability and native connectors needed for future flagship GPUs, ensuring you won't have to rebuild when memory prices finally drop.



The Thermal Solution: Modern high-density hardware runs hot. A case with superior airflow, like the darkFlash DY460, doesn't just look stunning—it provides the physical cooling needed to extend the lifespan of your current components while you wait for a better time to buy RAM.





(darkFlash PMT Series PSU - White Edition)



Peripherals: The Highest Return on Investment (ROI)

In 2026, you don't need a new GPU to make your PC feel "new." Sometimes, the most noticeable performance boost comes from what you touch every day.





Magnetic Switch Keyboards: Swapping to a darkFlash Magnetic Switch Keyboard provides an immediate upgrade in responsiveness. With features like Rapid Trigger, the tactile improvement in competitive gaming is often more noticeable than a 10 FPS increase from a more expensive graphics card.



Professional Gaming Mice: Upgrading your sensor and skates can refresh your gaming experience for a fraction of the cost of a new SSD.







Conclusion: Don't Let High Prices Compromise Your PC’s Potential





Don't settle for a cheap, suffocating case or a barely-sufficient power supply just to afford overpriced RAM. Invest in high-quality darkFlash components today to build a rock-solid foundation. By focusing on your case, power, and peripherals, you can enjoy a premium experience now and be ready to drop in that high-speed memory whenever the market stabilizes.

Beat the 2026 memory crisis with this smart guide to navigating soaring PC component prices.

The 2026 Memory Crisis: Why PC Prices are Rising and How to Build Smart

Berita Teknologi

Atasi krisis memori tahun 2026 dengan panduan cerdas ini untuk menavigasi kenaikan harga komponen PC yang meroket.

Krisis Memori 2026: Mengapa Harga PC Naik dan Cara Membangun PC dengan Cerdas

Following the recent price rebound of DDR4 and DDR5 memory, signs are emerging that GPU costs may soon climb as well. With flash and GDDR memory prices trending upward, the entire graphics card supply chain could feel the pressure. Here’s a breakdown of what’s happening and what it means for PC builders and gamers.

The semiconductor memory market is entering another upward cycle.

Recent data from TrendForce and DRAMeXchange shows that both DRAM and NAND flash prices have increased by 15–25% in late 2025, after nearly two years of decline.

Major manufacturers like Samsung, Micron, and SK Hynix have reduced older production lines and redirected capacity to meet surging AI and server demand. This has tightened supply for conventional memory chips used across PC components — from RAM modules to graphics cards.

A modern GPU relies on graphics memory (GDDR) to process and store data such as textures, frames, and shader information. In high-performance graphics cards, GDDR6 and GDDR6X memory modules can account for up to 20–25% of total production cost.

This means that even small changes in memory pricing can directly influence the final cost of a GPU — particularly for models with 

The recent surge in memory prices is not limited to DDR modules.

Both GDDR (Graphics Double Data Rate) and flash memory used in GPUs are also affected, due to several combined factors:

Fabrication capacity is increasingly prioritized for high-bandwidth memory (HBM) used in AI accelerators, which reduces supply for traditional GDDR chips used in gaming GPUs.

As manufacturers move from GDDR6 to GDDR7, production of older chips slows down, leading to higher costs for remaining stock.

Flash storage, used in GPU firmware and BIOS components, has seen double-digit percentage increases this quarter.

Longer delivery schedules and component shortages are prompting board makers to stockpile inventory, adding further cost pressure.

These factors collectively increase the bill of materials (BOM) for GPU production, even before assembly and logistics are considered.

While GPU manufacturers typically try to maintain stable pricing, cost pressure from memory components can eventually filter down to consumers.

Rather than direct MSRP hikes, consumers may see fewer discounts, slower price drops, or “refresh” models with adjusted specifications and memory sizes.

Despite upward cost trends, several factors may help contain large-scale price jumps:

As a result, the adjustment in GPU pricing is more likely to be gradual rather than sudden, depending on how memory supply evolves through 2026.

To understand where GPU pricing is heading, pay attention to:

These indicators can reveal whether memory costs are translating into real-world price movement.

Conclusion: The Memory Ripple Effect Continues

The memory market’s rebound is already visible in DDR4, DDR5, and NAND flash segments — and GPUs may be next in line. As GDDR and flash memory costs increase, graphics cards could gradually become more expensive over the coming months.

For PC builders and gamers, it may be wise to plan upgrades early or watch for clearance deals before the next product generation arrives.

While the increase may not be dramatic, the trend shows a clear reminder: in the tech world, memory prices influence everything — even the heart of your gaming PC.





Following the recent price rebound of DDR4 and DDR5 memory, signs are emerging that GPU costs may soon climb as well. With flash and GDDR memory prices trending upward, the entire graphics card supply chain could feel the pressure. Here’s a breakdown of what’s happening and what it means for PC builders and gamers.



Memory Prices Are Rising Again





(source credit: TrendForce)



The semiconductor memory market is entering another upward cycle.

Recent data from TrendForce and DRAMeXchange shows that both DRAM and NAND flash prices have increased by 15–25% in late 2025, after nearly two years of decline.

Major manufacturers like Samsung, Micron, and SK Hynix have reduced older production lines and redirected capacity to meet surging AI and server demand. This has tightened supply for conventional memory chips used across PC components — from RAM modules to graphics cards.



GPUs Depend Heavily on Memory





A modern GPU relies on graphics memory (GDDR) to process and store data such as textures, frames, and shader information. In high-performance graphics cards, GDDR6 and GDDR6X memory modules can account for up to 20–25% of total production cost.



This means that even small changes in memory pricing can directly influence the final cost of a GPU — particularly for models with large VRAM capacities like 16 GB or 24 GB.



Rising Flash and GDDR Costs



(image credit: Samsung Semiconductor)



The recent surge in memory prices is not limited to DDR modules.
Both GDDR (Graphics Double Data Rate) and flash memory used in GPUs are also affected, due to several combined factors:

AI-Driven Capacity Reallocation

Fabrication capacity is increasingly prioritized for high-bandwidth memory (HBM) used in AI accelerators, which reduces supply for traditional GDDR chips used in gaming GPUs.



Transition to Newer Nodes

As manufacturers move from GDDR6 to GDDR7, production of older chips slows down, leading to higher costs for remaining stock.



NAND/Flash Price Recovery

Flash storage, used in GPU firmware and BIOS components, has seen double-digit percentage increases this quarter.



Extended Lead Times

Longer delivery schedules and component shortages are prompting board makers to stockpile inventory, adding further cost pressure.



These factors collectively increase the bill of materials (BOM) for GPU production, even before assembly and logistics are considered.



Possible Impact on GPU Prices





While GPU manufacturers typically try to maintain stable pricing, cost pressure from memory components can eventually filter down to consumers.
Based on current trends:





Mid-range GPUs could see 5–10% higher production costs.



High-end GPUs with large VRAM or next-generation memory like GDDR7 could rise by 10–20% in total cost.

Rather than direct MSRP hikes, consumers may see fewer discounts, slower price drops, or “refresh” models with adjusted specifications and memory sizes.



Factors That Could Soften the Effect





Despite upward cost trends, several factors may help contain large-scale price jumps:





Softening GPU demand in the DIY and gaming market may encourage manufacturers to absorb part of the increase.



Improving yields of GDDR7 memory could lower per-chip costs over time.



Remaining inventory from earlier production runs may cushion the short-term impact.

As a result, the adjustment in GPU pricing is more likely to be gradual rather than sudden, depending on how memory supply evolves through 2026.



What to Keep an Eye On

To understand where GPU pricing is heading, pay attention to:





Spot and contract prices for GDDR6/GDDR7 on DRAMeXchange or TrendForce



Quarterly reports from Samsung, Micron, and SK Hynix on memory profitability



MSI, ASUS, and Gigabyte pricing adjustments or inventory clearances



Launch prices of upcoming GDDR7-based GPUs

These indicators can reveal whether memory costs are translating into real-world price movement.







Conclusion: The Memory Ripple Effect Continues

The memory market’s rebound is already visible in DDR4, DDR5, and NAND flash segments — and GPUs may be next in line. As GDDR and flash memory costs increase, graphics cards could gradually become more expensive over the coming months.

For PC builders and gamers, it may be wise to plan upgrades early or watch for clearance deals before the next product generation arrives.

While the increase may not be dramatic, the trend shows a clear reminder: in the tech world, memory prices influence everything — even the heart of your gaming PC.

DRAM/NAND prices are climbing and GDDR is tightening. Here’s how memory cost pressure could nudge GPU prices higher.

Will GPU Prices Rise Next? The Ripple Effect of Flash and Memory Cost Surges

Harga DRAM/NAND terus naik dan GDDR semakin langka. Berikut bagaimana tekanan biaya memori dapat mendorong harga GPU lebih tinggi.

Akankah Harga GPU Naik Selanjutnya? Efek Domino dari Lonjakan Biaya Flash dan Memori

Just months after the noticeable surge in DDR4 prices, the PC industry is facing another wave — this time with DDR5. Once expected to stabilize as production matured, DDR5 memory is now climbing sharply in cost. 

From high-end desktop kits to mainstream 16 GB modules, prices have risen as much as 

 in certain regions. What’s driving this new round of increases — and how might it affect PC builders, system integrators, and component brands?

, DRAM spot prices surged nearly 10% in a single week this October as buyers rushed to secure inventory ahead of further hikes. DDR5 modules — which once benefited from falling prices as adoption spread — are now trending upward in both spot and contract markets.

 reports that community data shows retail DDR5 kits from brands like Corsair, G.Skill, and Kingston rising significantly in Europe and Asia. In some regions, the price per gigabyte has nearly doubled compared to mid-year 2024 levels.

For consumers, this means one clear thing: upgrading or building a DDR5-based system is getting more expensive again.

The reasons behind the DDR5 price rise are complex, but a few major factors stand out:

Global AI infrastructure build-outs are consuming vast amounts of memory. Data centers deploying GPUs like NVIDIA’s H100 and H200 rely on high-bandwidth DRAM (HBM) and advanced DDR5 chips, directly competing with consumer-grade production capacity.

 recently noted, “AI data centers are swallowing the world’s memory supply.” This diversion of wafer allocation from PC DRAM to HBM has reduced output for DDR5 modules used in consumer and enterprise PCs.

2. Manufacturers Prioritizing High-Margin Products

Major DRAM suppliers — Samsung, SK Hynix, and Micron — have strategically shifted focus toward more profitable segments like HBM3E and LPDDR5X. Commodity DDR5 modules yield lower profit per wafer, so manufacturers are scaling back consumer DRAM lines to optimize margins.

When rumors of supply shortages surface, memory module assemblers and distributors often buy ahead to lock in pricing. This behavior, while rational, amplifies short-term demand and constrains supply in the spot market, leading to sudden price spikes — the same pattern we saw during DDR4’s recent rebound.

4. Supply Chain Transition and Yield Issues

As fabs migrate to 1β and 1α nm nodes for next-gen DRAM production, yields can initially drop. That limits supply while costs remain high. Combined with continued geopolitical uncertainties and logistics challenges, memory output simply isn’t keeping up with demand.

For PC builders and DIY enthusiasts, higher DDR5 prices increase total build cost — especially in mid-range and performance segments.

A memory kit that cost $80–90 earlier this year may now exceed $120–130. While that might seem minor for premium builds, it directly affects the 

, driven by AI hardware demand and restrained production volumes. TrendForce predicts overall DRAM prices could rise 

The silver lining is that DDR5 remains in high demand thanks to platform adoption (Intel 700-series, AMD AM5). As more users transition, economies of scale could eventually bring stability — but not before this current shortage cycle plays out.

DDR5’s price surge highlights the new reality of a memory market dominated by AI and data-center demand. As production capacity shifts toward high-bandwidth applications, consumer DRAM will continue to feel the squeeze. For PC enthusiasts and brands alike, this isn’t just a supply-chain story — it’s a reminder that even as technology evolves, the economics of silicon remain as volatile as ever.





Just months after the noticeable surge in DDR4 prices, the PC industry is facing another wave — this time with DDR5. Once expected to stabilize as production matured, DDR5 memory is now climbing sharply in cost. 

From high-end desktop kits to mainstream 16 GB modules, prices have risen as much as 30–50% in certain regions. What’s driving this new round of increases — and how might it affect PC builders, system integrators, and component brands?



The Current Market Situation





(image credit :TrendForce)



According to TrendForce, DRAM spot prices surged nearly 10% in a single week this October as buyers rushed to secure inventory ahead of further hikes. DDR5 modules — which once benefited from falling prices as adoption spread — are now trending upward in both spot and contract markets.



Notebookcheck reports that community data shows retail DDR5 kits from brands like Corsair, G.Skill, and Kingston rising significantly in Europe and Asia. In some regions, the price per gigabyte has nearly doubled compared to mid-year 2024 levels.

For consumers, this means one clear thing: upgrading or building a DDR5-based system is getting more expensive again.



What’s Causing the Surge





The reasons behind the DDR5 price rise are complex, but a few major factors stand out:



1. AI and Data Center Demand

Global AI infrastructure build-outs are consuming vast amounts of memory. Data centers deploying GPUs like NVIDIA’s H100 and H200 rely on high-bandwidth DRAM (HBM) and advanced DDR5 chips, directly competing with consumer-grade production capacity.

As Tom’s Hardware recently noted, “AI data centers are swallowing the world’s memory supply.” This diversion of wafer allocation from PC DRAM to HBM has reduced output for DDR5 modules used in consumer and enterprise PCs.



2. Manufacturers Prioritizing High-Margin Products

Major DRAM suppliers — Samsung, SK Hynix, and Micron — have strategically shifted focus toward more profitable segments like HBM3E and LPDDR5X. Commodity DDR5 modules yield lower profit per wafer, so manufacturers are scaling back consumer DRAM lines to optimize margins.



3. Panic Buying and Inventory Hedging

When rumors of supply shortages surface, memory module assemblers and distributors often buy ahead to lock in pricing. This behavior, while rational, amplifies short-term demand and constrains supply in the spot market, leading to sudden price spikes — the same pattern we saw during DDR4’s recent rebound.



4. Supply Chain Transition and Yield Issues

As fabs migrate to 1β and 1α nm nodes for next-gen DRAM production, yields can initially drop. That limits supply while costs remain high. Combined with continued geopolitical uncertainties and logistics challenges, memory output simply isn’t keeping up with demand.



Impact on PC Builders



(Image Credit: idealo)



For PC builders and DIY enthusiasts, higher DDR5 prices increase total build cost — especially in mid-range and performance segments.

A memory kit that cost $80–90 earlier this year may now exceed $120–130. While that might seem minor for premium builds, it directly affects the bill of materials (BOM) for integrators and system assemblers.



Market Outlook





Analysts expect the DRAM price uptrend to continue into early 2026, driven by AI hardware demand and restrained production volumes. TrendForce predicts overall DRAM prices could rise 10–20% quarter-over-quarter, depending on market response.

The silver lining is that DDR5 remains in high demand thanks to platform adoption (Intel 700-series, AMD AM5). As more users transition, economies of scale could eventually bring stability — but not before this current shortage cycle plays out.



What Builders and Buyers Should Do





Secure modules early: If you’re planning new PC builds or system batches, lock in DDR5 inventory before the next quarter’s pricing revision.



Offer flexible configurations: For OEMs or boutique builders, consider offering both DDR4 and DDR5 SKUs where platform compatibility allows.



Monitor supplier communication: Stay updated with module vendors on lead times and allocation changes.



Communicate value: Even as costs rise, focus marketing on overall system performance, stability, and forward-compatibility, not just raw specs.



Conclusion

DDR5’s price surge highlights the new reality of a memory market dominated by AI and data-center demand. As production capacity shifts toward high-bandwidth applications, consumer DRAM will continue to feel the squeeze. For PC enthusiasts and brands alike, this isn’t just a supply-chain story — it’s a reminder that even as technology evolves, the economics of silicon remain as volatile as ever.

DDR5 memory prices are climbing sharply in 2025 as AI demand, supply reallocation, and panic buying tighten the DRAM market. Here’s why it’s happening and what it means for PC builders.

DDR5 Memory Prices Are Rising — Here's Why It's Happening Again

Harga memori DDR5 melonjak tajam pada tahun 2025 karena permintaan AI, alokasi ulang pasokan, dan pembelian panik memperketat pasar DRAM. Berikut alasannya dan apa artinya bagi perakit PC.

Harga Memori DDR5 Naik — Inilah Alasannya

Sebagai penggemar game dan DIY komputer di era ini, kami, darkFlash, merasa bangga dan bersyukur karena terus memikirkan cara mengembangkan produk yang mengesankan dan luar biasa dengan fasilitas kelas atas dengan merakit dan menggunakan casing PC, pendingin CPU, kipas casing, dan bahkan kursi dan meja gaming secara langsung.

Tujuan kami adalah menciptakan produk yang dapat memberikan dampak luar biasa bagi setiap pengguna.

darkFlash

As an enthusiast of games and computer DIY in this age, we, darkFlash, feel proud and grateful for keep thinking how to develop impressive and extraordinary products with high-end facilities by assembling and using the PC cases, CPU coolers, case fans, and even gaming chairs and tables in person.

Our goal is to create products that could extremely exert its effect by every user.

RAM Terungkap: Berapa Banyak Modul RAM yang Terbaik untuk PC Anda?

Pengaturan yang Disarankan: Dua Stick dalam Dual-Channel

Apa yang terjadi jika Anda menggunakan empat batang kayu?

Hal-hal Penting yang Perlu Diingat Saat Memasang RAM:

1. Penempatan Slot yang Tepat

2. Hindari Mencampur Merek atau Kecepatan